Riga-Flo GT

for turbo machinery

Riga-Flo GT Filter

Robust Construction

Specifically designed for turbo machinery applications, the Riga-Flo GT's welded wire media support grid, corrosion resistant contour stabilizers, galvanized steel enclosing frame and protective wire mesh screens on both the air entering and leaving sides, provide the rigidity and durability required to ensure structural integrity throughout the life of the filter.

The filter pack is continuously bonded to the inside of the enclosing frame and the filter is capable of withstanding a 25" w.g. (6.2 Kpa) pressure drop without any noticeable distortion.

Installation

Riga-Flo GT filters are easily installed and serviced using Camfil Farr's Universal holding frames in either built up banks or side access housings.

High Efficiency Medias

The Riga-Flo GT is available in three different efficiencies:

All medias are high density micro fine glass fibers which are laminated to a nonwoven, synthetic backing to form a lofted filter blanket which is not affected by humidity.

Model Dimensions Part # Capacity Initial Resistance Final Resistance Media Area
GT-15 24x24x12 78163-1 2000 CFM 0.30" w.g. 3.0" w.g. 54.4 FT²
GT-100 24x24x12 78163-2 2000 CFM 0.50" w.g. 3.0" w.g. 54.4 FT²
GT-200 24x24x12 78163-3 2000 CFM 0.65" w.g. 3.0" w.g. 54.4 FT²

HALF SIZE FILTERS ARE ALSO AVAILABLE

Performance

Riga-Flo GT Performance Resistance

Specifications

Construction: Galvanized steel frame with media contour stabilizers to maintain pleat configuration and protective screen on both upstream and downstream sides.

Media: High density, micro fine glass fibers, laminated to a nonwoven, synthetic backing.

Filter Class: 60-65%, 80-85% and 90-95% per Ashrae 52.1

Contact us for additional information on: