CamPulse GT HemiPleat Cartridges

to fit Gas Turbine Intake Systems

CamPulse GT HemiPleat Cartridge Filter

CamPulse GT filters are an upgrade from typical conical + cylindrical pairs. They are designed to protect rotating machinery in high dust load environments and provide continuous operation and stable pressure.

Uniform media pleating assures effective dust holding capabilities through maximum media exposure and provides maximum protection with minimum airflow restrictions.

Adhesive bonding provides an excellent seal between metal and paper, eliminating by-pass. Gasket on metal end caps is permanently bonded to assure an optimal seal at installation.

Advanced design provides built-in structural strength to the media fiber. Filter media is protected from damage by a rigid expanded metal liner on the inside of the element.

Poly Blend Filter Media

PolyTech Ultra High Efficiency (White/green) - Propriety blend of cellulosic fibers and polyester fibers with a moisture resistant silicone treatment for optimum dust release characteristics yielding long service life at high filtration efficiencies.

Specifications

Efficiency: MERV 15 / EN-F9

Air Permeability: 25-35 cfm/sq. ft. per 0.5" w.c. (457 - 640 m³/m²h at 125 Pa)

Mullen Burst: (Dry) 40 psi [2.8 bars] / (20 psi) [1.4 bars] - Minimum

Gaskets: Polyisoprene molded closed cell gasket

End Caps & Liner: Galvanized steel (top & bottom)

Filter Sealant: Solid polyurethane top/bottom

Max Temps: 160°F (71°C) Operating / 180°F (82°C) Surge

External helical cords and internal screen secure the filter element from movement

Configurations

HemiPleat GT Filter Pairs - (Large and small filter element set)

Part # Set Model PolyTech Media Metal Finish Set Includes
212187001 HMPGT-HE-SET High Efficiency Galvanized* 211891001 & 211892001
*Cartridges are also available with stainless steel or powder coated parts for highly corrosive environments.

HemiPleat GT Filter Elements

Part # Model PolyTech Media Metal Finish Dimensions
211891001 HMPGTS-147HE High Efficiency Galvanized 12.75" OD x 26" L
211892001 HMPGTL-226HE High Efficiency Galvanized 17.50" OD x 26" L

CamPulse GT Cylindrical Filters

CamPulse GT HemiPleats replace typical conical + cylindrical pairs.

CamPulse GT Hemipleat Filters

CamPulse GT HemiPleat Layout

HemiPleat vs. Typical Pleats

HemiPleat Pleats Comparison

Let your turbine

breath easier!

HemiPleat Pleat Comparison - Typical Pleat

Contact us for additional information on: