Cam GT
for turbo machinery
Patent pending construction
Cam GT’s large filter surface is based on Camfil Farr’s patent pending construction featuring vertical pleats, hot melt separators and polyurethane seal. The filter media packs are reinforced with a strong backing screen and enclosed in a robust plastic frame to withstand the often severe pressure fluctuations encountered in turbo machinery applications. With the backing screen and the molded polyurethane gasket permanently fixed to the filter frame, the filter installation simplified with limited risk for filter media damage and leakages.
High Humidity Conditions
Cam GT’s unique construction allows trapped water to drain freely from the filter during operation, thus avoiding re-entrainment of dissolved impurities and maintaining low pressure drop under high humidity conditions.
Superior Engine Protection
The Cam GT range includes a H10 as well as a H12 version. They both offers considerable improvements in engine protection resulting in lower engine degradation and prolonged service intervals without need of shutdowns for compressor cleaning. The H12 version includes 50% more filter media in order to maintain a low pressure drop also with this extremely high filtration efficiency.
Key Features
- offers optimum engine protection
- low pressure drop also in ”wet” conditions
- improves overall filter economy
- increases service life
- excellent in damp and humid climates
- ensures water drainage
- heavy duty construction
- easy mounting
- completely incinerable
- high filtration efficiency
- compact
- excellent burst pressure performance
Camfil Farr’s gas turbine filters are tested at VTT*, in accordance with EN 779:2002. Burst pressure test have been conducted at VTT with excellent results.
* independent test institute
| Model | Dimension | Media Area FT² | Air Flow / Pressure Loss CFM/"wg | Ship Data (lbs.) |
Filter Class EN779 |
Dust holding capacity at 450 Pa/1.8 ”wg g |
| GT-242412-85 | 23.3x23.3x11.4 | 204 | 2500/0.48 | 15.4 | F7 | 550 |
| GT242412-98 | 23.3x23.3x11.4 | 204 | 2500/0.64 | 15.4 | F9 | 422 |
| GT-242412-H10 | 23.3x23.3x11.4 | 204 | 2500/0.92 | 15.4 | H10 | |
| GT-242412-H12 | 23.3x23.3x11.4 | 301 | 2500/1.57 | 15.4 | H12 | |
| GT-241212-85 | 23.3x11.4x11.4 | 97 | 1250/0.58 | 11.0 | F7 | 225 |
| GT-241212-98 | 23.3x11.4x11.4 | 97 | 1250/0.72 | 11.0 | F9 | 210 |
| GT-241212-H10 | 23.3x11.4x11.4 | 97 | 1250/1.0 | 11.0 | H10 | |
| GT-241212-H12 | 23.3x11.4x11.4 | 143 | 1250/1.61 | 11.0 | H12 |
Pressure Drop
Specifications
Type: Double-pleated, compact, high filtration efficiency, incinerable
Frame: Polypropylene
Media: Glass fiber media
Separators: Hot melt
Seal: Polyurethane
Gasket: Polyurethane
Class EN: 779 F7, F9
Class EN 1822: H10, H12
ASHREA 52.2: MERV 13, 15
Recommended final pressure drop: 600 Pa
Recommended air flow nominal: 4250 m³/h / 2500 cfm
Temperature: 80 °C max. running temp.
Burst strength: >7500 Pa / 30 ”wg
Contact us for additional information on:
- Gas turbine intake filtration
- Mist elimination
- Intake & Exhaust silencing
- Acoustic packages
- Inlet cooling
- Filtration upgrades / Retrofits
- Life cycle projections for your applications