30/30 GT

for turbo machinery

Camfil Farr Pre Filter 30/30 GT for turbomachinery

Application Areas

Used primarily as a pre-filter to extend the service life of final filters, the 30/30 GT offers low initial pressure drop and high dust holding capacity. The 30/30 GT is also widely used for GT enclosure ventilation systems where efficiency filters are called for.

Exclusive Media Blend

The 30/30 GT´s exclusive media is a manufactured by Camfil Farr and is a proprietary blend of cotton and polyester fibers. The media requires no electric charge to enhance filtration efficiency.

Construction

The 30/30 GT´s structural integrity is maintained by the use of a high strength beverage board frame. Diagonal supports are bonded to the air entering and leaving sides of each pleat. Up-and downstream pleat separators further ensures optimum operation.

Advantages

  • high mechanical strength

  • rigid, water resistant cardboard frame

  • large media surface

  • unique radial pleat design

  • bonded into case to eliminate air bypass

Technical Data

 

Model Dimensions Media Area (m²) Air Flow, m³/h
Pressure loss, Pa		 Shipping Data Filter Class
30/30-24244NOM 610x610x100 2,56 4141/90 0.04 1,45 G4

Performance

30/30GT Performance Resistance 

30/30GT Performance Efficiency 

Specifications

Type: High performance disposable pleated panel filter

Frame: Rigid water resistant card board

Media: Blended cotton and polyester

Class EN 779:2002: G4

Recommended final pressure drop: 250 Pa

Temperature: 70 °C max. in continuous service

Contact us for additional information on: